All You Need To Know About Juicers

About Juicers

Juicers may seem like pretty simple devices, but they’re often a bit more complicated than most people think. However, don’t worry, we’re here to let you in on the things you need to know about the best juicer under $100. There are a plethora of important details and features that many people often overlook when it comes to choosing a juicer. In this article, we’re going to highlight the things you need to consider before selecting a juicer.

1.         The Juicing Screen

The juicing screen plays a vital role in the entire juicing process, and it’s usually there in almost all types of juicers. The screen normally sits close to the augur and allows for ingredients to tightly pass through it as they brush up against the sieve features. These sieve components separate the pulp from the juice and need to be well-maintained if you want to ensure efficient juicing.

While such screens can be found in all types of juicer devices, it looks different in each. The ones you find in horizontal juicers are often thin and small with a tiny sieve ring for separation purposes, while vertical screens happen to be a lot wider since they need to fit bigger augurs.

2.         The Augur and Gears

Without the augur, there’s simply no juicing that can take place. It’s that screw-head piece you find at the core of a juicer and it’s designed to pull ingredients so that they can get crushed against the juicing screen inside the juicer. It’s arguably the most crucial component in most of the juicers out there. If you want to ensure consistent high-yielding and efficient juice production, then you need to make sure you get a juicer with a good quality augur.

3.         Juicing Chamber And Drum Guide

The augur and screen may be basically what makes up a juicer, however, if they don’t have protective outer layers, then the juicing process would be a whole lot messier. This is why it’s important for a juicer to have an outer casing feature that houses the screen and augur so that they can work to the best of their ability.

The horizontal juicer device uses something known as a drum guide, which connects the main body to the other parts and then acts as an outer case in which the screen and augur can be placed. Vertical juicers, on the other hand, take a different approach and use a juicing bowl rather than a drum guide.

4.         The Hooper

The hooper, which is also commonly referred to as the feed chute, is unique to vertical juicer devices. It’s attached to the drum guide and its purpose is to seal the juicing ingredients in place as the juice is being prepared. In the horizontal juicer design, it can also act as the pulp ejaculation point.

Conclusion

Now you know a little bit more about how the juicer works, right? Hopefully, this article has helped enlighten you on some of the mysteries involving a juicer and how they actually work. So, what are you waiting for? Get on with your juicing.

Leave a Reply

Your email address will not be published. Required fields are marked *